The equipment consists of main reduction box,die casing,wheel frame,sash brace and
electrical control system.The spinning drawing blocks are driven by JZT series motor,with gear coupling runs changeful gears to reduce speed. The drawing blocks are verticaly fixed in sealed box body.The gear pair are lubricated with oil.
The set of the machines is an ideal equipment for drawing wire stock of high,medium and carbon steel,as well as coper,alumium and alloy.The machine are applied for drawing wire in the factories,such as wire-steel factor,metal mesh factory and nail making factory etc.
In order to lower residual heat on the surface of the block, the cooling means is installed in inter-wall of the block,the wortle is soaked in cooling water to reduce its working temperature.
The machine runs with carvel or linkage. The safety halt gear is installed by the position of operating block.
Max diam of material
Min diam of material
Diam of block
Max average condensation
Max.speed of block
ONE-STOP WIRE&NAIL MAKING MACHINERY EXPERT(Skilled in kinds wire&nail making project)
Higher grade material and key parts heattreatment so as to keep longer woking life
automatically stop to prevent possible mechanical accidents
length tolernace is <0.5mm
24hours professial service
Lasting relationsheep keeping so as to sure customer’s project under well working
QUESTION1:What kind material used in the wire drawing?
A1:Usually we use Q195/235,SAE1006/1008/1010 ect
QUESTION2:How many ton does one machine make per day
A2:The wire drawing output will depend the wire diameter input and output,also depend the quantity of one group.
QUESTION3:Do we need the wire annealing furnace
A3:The furnace will need when produce for wire diameter less than 1.4mm.
QUESTION4:How long is the machine delivery time?
A4:Usually there will need 10days for normal machine .And if the machine order to make will take a bit long time .Because normal model machine we have stock for sale.